There are a range of solutions for mounting your Minn Kota or Bixpy electric outboard motor to your canoe, kayak, boat or inflatable Looking for an option that's not listed? Feel free to Contact Us for availability and advice.
The most popular and simple way of mounting a transom mount electric outboard such as a Minn Kota to an open canoe or boat with a lipped gunwale.
This Bixpy adaptor will fit most Pedal Drive or most fin-driven kayaks including many of the rotomoulded Hobie Mirage Drive Kayak range.Price:
This adaptor allows virtually any kayak or small boat to take a Bixpy J-2 Motor. A great solution if no dedicated adaptor is available. Some level of DIY will be required for this install.Price:
This will allow a Bixpy J-2 Motor to fit your small boat, tender, dinghy or SIB. Also works with some kayaks/inflatables that have a transom.Price:
This rudder blade allows your kayak to take a Bixpy J-2 Motor, working with a 10mm rudder pin. With most rudder ready kayaks you should be able to swap your exisiting rudder for this.Price:
An adaptor that will allow your SUP or Board with US fin box to take a Bixpy J-2 Motor. This adaptor slides into the fin box and fixes in place with a T-Track bolt.Price:
This glue-on adaptor plate allows you to add the Bixpy J-2 Motor Fin Adaptor (Not Included) to almost any inflatable including kayaks, canoes and SUPs.
Adhesive & Fin Adaptor Not Included.
This Slide and Lock Fin adaptor works with the Bixpy Slide & Lock Plate and is similar to that found on most inflatable SUPs.Price:
If your SUP or inflatable craft has a Flip and Lock fin plate already fitted, then you can use this Bixy adaptor to easily add the J-2 motor kit.Price: